Research package:
Extensive SRV® equipment for research institutes
and R&D driven companies
SRV®5 basic configuration Oscillation (x-axis) floor standing device
Test force range 25 - 2500 N
Large recording block with two piezoelectric
force transducers
parallel rocker
OCA operating and control software with analysis package 1
(Highlights: Automated process start, test start
Procedures, XY display, report generator, diagnostic
Options for PC and SRV®, extensive read-out
options, clear presentation of results,
Preparation for TriboProfiling® data analysis),
Monitor table, 23 inch LCD touch monitor
High-quality industrial PC for high data throughput
and 365-24/7 operation (7-year availability guarantee for
replacement parts, local manufacturer warranty), mouse, keyboard,
Manual
Factory calibration certificate and declaration of conformity
calibration oil
Rotation base module including accessories
rotary block, rotary engine
Radius shift (y-axis)
2-channel sensors for torque 40 Nm and friction 400 N
Control and measurement software (RPM, left-right, measurement
friction torque, friction force)
Adapter for holding test discs 100 x 10 mm
Software options for the OCA software
High Resolution Signal Analysis (HRA) Oscillation:
Spatial and time-resolved stroke and friction signal analysis,
displayed on 1 period Display of friction hysteresis
High Resolution Signal Analysis (HRA) Rotation:
Spatial and time-resolved analysis of friction torque and friction force,
shown on one rotation revolution each
Advanced Tribo Data (ATD) measurement option:
with the following parameters: Effective coefficient of friction (root mean
Square value) over a period (µeff [ ]), mean coefficient of friction
over a period (µmean [ ]), coefficient of friction hysteresis value,
(µhyst [ ]), drive current as a measure of motor power [A],
Number of cycles [ ], glide distance per period [mm], glide speed
speed [m/s], average sliding speed [m/s], stroke zero position
(offset, shift) [mm]
Combi-Drive: Joint operation of at least two of
three possible types of movement (oscillation, rotation, y-axis)
Extension and calibration test force
Device for automatic test force calibration included
software
Test force cassette 2 – 200 N
Parallel rocker required for load ranges of 100 N
and 200 N
More measurement options
Measurement of electrical resistance oscillation
Measurement of electrical resistance to rotation
Accessories for test preparation:
Insulated clamping screw for the upper specimen holder
Interchangeable parts in the middle for test discs Ø 24 mm
Interchangeable parts off-centre for test discs Ø 24 mm
Tweezers to hold the specimen and spatula to apply
of the lubricant
Fat gauge for the defined application of fat to the bottom
specimen
Tool set for test preparation
Specimen holder and adapter for oscillation:
Varioblock: Special block with horizontal test body height
adjustment and vertical clamping device, temperature sensor
and 2 heating elements
Ball holder for 10 mm steel ball
Holder for hemispheres (e.g. for radius 16 mm)
Specimen holder ring/surface for ring or surface geometry 21 x 6 mm
Line holder for steel cylinder 15 x 22mm, lengthwise support,
10° angular offset
Line holder for steel cylinder 6 x 8mm, longitudinal support,
10° angular offset
Specimen holder and adapter for oscillation:
Test specimen holder for ring/surface for hydraulic/gear oils
Specimen, material: 100Cr6, fully hardened:
50 pieces discs 24 x 7.9 mm, lapped on both sides, according to DIN 51834,
Surface 0.50-0.65 µm Rz
100 pcs. steel ball 10 mm, polished, DIN 51834
50 pcs cylinder 6 x 8 mm
50 pcs cylinder 15 x 22 mm
50 pcs. ring/surface 21 x 6 mm, one side lapped, surface
0.50-0.65 µm Rz
50 pcs. Hemisphere, surface polished, radius and material according to
request (usual: r = 16 mm, 100Cr6)
10 discs 18 x 2 mm according to ASTM D 7420, DIN 51834-9,
3 raised surfaces, each Ø 3 mm, material: POM
10 discs 100 x 10 mm, lapped surface, both sides
usable, Rz approx. 0.50-0.65 µm, plane parallelism 2 µm
10 pcs. pin 3 x 15.8 mm, polished
1 piece test body set for hydraulic/gear oils
(1 set = 1 ring + 1 disc)
Upper specimen: steel ring, OD 38 mm, ID 34 mm
Lower specimen: steel disk, OD 42 mm
Two-day operator training at our premises in Munich
For on-site commissioning and training, please contact us
an offer.
Extensive SRV® equipment for research institutes
and R&D driven companies
SRV®5 basic configuration Oscillation (x-axis) floor standing device
Test force range 25 - 2500 N
Large recording block with two piezoelectric
force transducers
parallel rocker
OCA operating and control software with analysis package 1
(Highlights: Automated process start, test start
Procedures, XY display, report generator, diagnostic
Options for PC and SRV®, extensive read-out
options, clear presentation of results,
Preparation for TriboProfiling® data analysis),
Monitor table, 23 inch LCD touch monitor
High-quality industrial PC for high data throughput
and 365-24/7 operation (7-year availability guarantee for
replacement parts, local manufacturer warranty), mouse, keyboard,
Manual
Factory calibration certificate and declaration of conformity
calibration oil
Rotation base module including accessories
rotary block, rotary engine
Radius shift (y-axis)
2-channel sensors for torque 40 Nm and friction 400 N
Control and measurement software (RPM, left-right, measurement
friction torque, friction force)
Adapter for holding test discs 100 x 10 mm
Software options for the OCA software
High Resolution Signal Analysis (HRA) Oscillation:
Spatial and time-resolved stroke and friction signal analysis,
displayed on 1 period Display of friction hysteresis
High Resolution Signal Analysis (HRA) Rotation:
Spatial and time-resolved analysis of friction torque and friction force,
shown on one rotation revolution each
Advanced Tribo Data (ATD) measurement option:
with the following parameters: Effective coefficient of friction (root mean
Square value) over a period (µeff [ ]), mean coefficient of friction
over a period (µmean [ ]), coefficient of friction hysteresis value,
(µhyst [ ]), drive current as a measure of motor power [A],
Number of cycles [ ], glide distance per period [mm], glide speed
speed [m/s], average sliding speed [m/s], stroke zero position
(offset, shift) [mm]
Combi-Drive: Joint operation of at least two of
three possible types of movement (oscillation, rotation, y-axis)
Extension and calibration test force
Device for automatic test force calibration included
software
Test force cassette 2 – 200 N
Parallel rocker required for load ranges of 100 N
and 200 N
More measurement options
Measurement of electrical resistance oscillation
Measurement of electrical resistance to rotation
Accessories for test preparation:
Insulated clamping screw for the upper specimen holder
Interchangeable parts in the middle for test discs Ø 24 mm
Interchangeable parts off-centre for test discs Ø 24 mm
Tweezers to hold the specimen and spatula to apply
of the lubricant
Fat gauge for the defined application of fat to the bottom
specimen
Tool set for test preparation
Specimen holder and adapter for oscillation:
Varioblock: Special block with horizontal test body height
adjustment and vertical clamping device, temperature sensor
and 2 heating elements
Ball holder for 10 mm steel ball
Holder for hemispheres (e.g. for radius 16 mm)
Specimen holder ring/surface for ring or surface geometry 21 x 6 mm
Line holder for steel cylinder 15 x 22mm, lengthwise support,
10° angular offset
Line holder for steel cylinder 6 x 8mm, longitudinal support,
10° angular offset
Specimen holder and adapter for oscillation:
Test specimen holder for ring/surface for hydraulic/gear oils
Specimen, material: 100Cr6, fully hardened:
50 pieces discs 24 x 7.9 mm, lapped on both sides, according to DIN 51834,
Surface 0.50-0.65 µm Rz
100 pcs. steel ball 10 mm, polished, DIN 51834
50 pcs cylinder 6 x 8 mm
50 pcs cylinder 15 x 22 mm
50 pcs. ring/surface 21 x 6 mm, one side lapped, surface
0.50-0.65 µm Rz
50 pcs. Hemisphere, surface polished, radius and material according to
request (usual: r = 16 mm, 100Cr6)
10 discs 18 x 2 mm according to ASTM D 7420, DIN 51834-9,
3 raised surfaces, each Ø 3 mm, material: POM
10 discs 100 x 10 mm, lapped surface, both sides
usable, Rz approx. 0.50-0.65 µm, plane parallelism 2 µm
10 pcs. pin 3 x 15.8 mm, polished
1 piece test body set for hydraulic/gear oils
(1 set = 1 ring + 1 disc)
Upper specimen: steel ring, OD 38 mm, ID 34 mm
Lower specimen: steel disk, OD 42 mm
Two-day operator training at our premises in Munich
For on-site commissioning and training, please contact us
an offer.